跳转到主内容
帮助

当前版本: Ben ,

文本:

Software corrupt. You will need to restore the firmware either via Samsung Kies (application) or by downloading the Firmware from Sammobile and flashing it using a program called ODIN with the device connected to your computer.
Note: You can download Samsung Kies from here:
+
http://www.samsung.com/au/support/usefulsoftware/KIES/
You can restore the software on your phone via Samsung Kies. If I can remember you do it via Tools > Firmware upgrade and initialization. This will prompt you to enter the model number and the serial number of the phone which is usually at the back of the phone or in the battery compartment.
+
If the Samsung Kies method does not allow you to download the firmware for your phone then you'll have to go to http://www.sammobile.com/firmwares/ where you type your model number of your phone to find the firmware for your phone. Make sure you choose latest version to the network it was mainly with.
Samfirmware instructions (After the file has finished downloading):
# Extract (unzip) the firmware file
# Download Odin v3.10.7
# Extract Odin ZIP file
# Open Odin v3.10.7
# Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
# Connect phone and wait until you get a blue sign in Odin
# Add the firmware file to AP / PDA
# Make sure re-partition is NOT ticked
# Click the start button, sit back and wait few minutes
# Before moving to step 11, you may want for it to get to the welcome screen as it sets up the phone.
# Wait until it says pass. It is then safe to unplug after that.

状态:

open

编辑: Ben ,

文本:

Software corrupt. You will need to restore the firmware either via Samsung Kies (application) or by downloading the Firmware from Sammobile and flashing it using a program called ODIN with the device connected to your computer.
+Note: You can download Samsung Kies from here:
+http://www.samsung.com/au/support/usefulsoftware/KIES/
+
+You can restore the software on your phone via Samsung Kies. If I can remember you do it via Tools > Firmware upgrade and initialization. This will prompt you to enter the model number and the serial number of the phone which is usually at the back of the phone or in the battery compartment.
If the Samsung Kies method does not allow you to download the firmware for your phone then you'll have to go to http://www.sammobile.com/firmwares/ where you type your model number of your phone to find the firmware for your phone. Make sure you choose latest version to the network it was mainly with.
Samfirmware instructions (After the file has finished downloading):
# Extract (unzip) the firmware file
# Download Odin v3.10.7
# Extract Odin ZIP file
# Open Odin v3.10.7
# Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
# Connect phone and wait until you get a blue sign in Odin
# Add the firmware file to AP / PDA
# Make sure re-partition is NOT ticked
# Click the start button, sit back and wait few minutes
# Before moving to step 11, you may want for it to get to the welcome screen as it sets up the phone.
# Wait until it says pass. It is then safe to unplug after that.

状态:

open

原帖由: Ben ,

文本:

Software corrupt. You will need to restore the firmware either via Samsung Kies (application) or by downloading the Firmware from Sammobile and flashing it using a program called ODIN with the device connected to your computer.

If the Samsung Kies method does not allow you to download the firmware for your phone then you'll have to go to http://www.sammobile.com/firmwares/ where you type your model number of your phone to find the firmware for your phone. Make sure you choose latest version to the network it was mainly with.

Samfirmware instructions (After the file has finished downloading):

# Extract (unzip) the firmware file
# Download Odin v3.10.7
# Extract Odin ZIP file
# Open Odin v3.10.7
# Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
# Connect phone and wait until you get a blue sign in Odin
# Add the firmware file to AP / PDA
# Make sure re-partition is NOT ticked
# Click the start button, sit back and wait few minutes
# Before moving to step 11, you may want for it to get to the welcome screen as it sets up the phone.
# Wait until it says pass. It is then safe to unplug after that.

状态:

open