跳转到主内容
帮助

原帖由: aqi ,

文本:

The best way to give a good quality is using OCA instead of LOCA- but that method is gonna b expensive- coz you need autoclave vacum machin to get rid of bubbles.

So the second best way is as younis said take the back light off- but you need to make sure you are working in dust free workplace.

Or try sugru on the sides of lcd to prevent LOCA between LCD and BACKLIGHT-

If you are very good in alignment of GLASS and LCD- coz you can not use mouldy if you use sugru

状态:

open