跳转到主内容
帮助

当前版本: jonathan ,

文本:

These Motorola says to use a #00 phillips but IMO a #000 fits a little deeper into it. I make sure to a)press down hard b) make sure I'm pressing down at exactly a right angle. It's a tough job. [http://www.inovagent.com|Motorola DROID repair]
+
+Wait I just saw Doug's first post..they are "thread forming?" That sounds suspiciously like "self-tapping" which would make sense as far as how tight they are in there. Whenever I take them out there is bare metal on the threads, even though the screws themselves are black.
+
+Steady, hard pressure downward with a #000 bit using T-handle thing I created myself is the key, since I started using this self-made tool I haven't been unable to remove these screws and re-use them.

状态:

open

原帖由: jonathan ,

文本:

These Motorola says to use a #00 phillips but IMO a #000 fits a little deeper into it.  I make sure to a)press down hard b) make sure I'm pressing down at exactly a right angle.  It's a tough job.  [http://www.inovagent.com|Motorola DROID repair]

状态:

open