跳转到主内容
帮助

当前版本: Anh Le ,

文本:

Hi Luke.
 
The ideal range is from 4 to 6 inches (10 to 15 cm) towards the Dino's sensors. Moreover, your motion must not be above or below Dino's sensors by 4 inches (10 cm). If your Zoomer is fully charged and it does not respond to your motions within the ideal range above, please consider changing the censor using this [https://www.ifixit.com/Guide/Zoomer+Jurassic+World+Indominus+Rex+Nose+Sensors+Replacement/56668|guideguide|56668|guide].
The ideal range is from 4 to 6 inches (10 to 15 cm) towards the Dino's sensors. Moreover, your motion must not be above or below Dino's sensors by 4 inches (10 cm). If your Zoomer is fully charged and it does not respond to your motions within the ideal range above, please consider changing the censor using this [https://www.ifixit.com/Guide/Zoomer+Jurassic+World+Indominus+Rex+Nose+Sensors+Replacement/56668|guideguide|56668|guide].
 
Please visit our [[Zoomer Jurassic World Indominus Rex Troubleshooting|troubleshooting page]] if you have any further question.
 
Anh Le

状态:

open

编辑: Anh Le ,

文本:

Hi Luke.
 
The ideal range is from 4 to 6 inches (10 to 15 cm) towards the Dino's sensors. Moreover, your motion must not be above or below Dino's sensors by 4 inches (10 cm). If your Zoomer is fully charged and it does not respond to your motions within the ideal range above, please consider changing the censor using this guide[https://www.ifixit.com/Guide/Zoomer+Jurassic+World+Indominus+Rex+Nose+Sensors+Replacement/56668|guide].
The ideal range is from 4 to 6 inches (10 to 15 cm) towards the Dino's sensors. Moreover, your motion must not be above or below Dino's sensors by 4 inches (10 cm). If your Zoomer is fully charged and it does not respond to your motions within the ideal range above, please consider changing the censor using this guide[https://www.ifixit.com/Guide/Zoomer+Jurassic+World+Indominus+Rex+Nose+Sensors+Replacement/56668|guide].
 
Please visit our [[Zoomer Jurassic World Indominus Rex Troubleshooting|troubleshooting page]] if you have any further question.
 
Anh Le

状态:

open

原帖由: Anh Le ,

文本:

Hi Luke.

The ideal range is from 4 to 6 inches (10 to 15 cm) towards the Dino's sensors. Moreover, your motion must not be above or below Dino's sensors by 4 inches (10 cm). If your Zoomer is fully charged and it does not respond to your motions within the ideal range above, please consider changing the censor using this guide.

Please visit our [[Zoomer Jurassic World Indominus Rex Troubleshooting|troubleshooting page]] if you have any further question.

Anh Le

状态:

open