跳转到主内容
帮助

当前版本: Sam Goldheart (投票详情) ,

文本:

Remove the Power Supply.  Right next to the heat sink is a plateau.   There is  a notch in the power supply to avoid it...on the side opposite the power supply's wires.  Place 2 Irwin Utility Knife Blades on the plateau, so that the power supply will apply the pressure for you.  Retighten the powersupply.  Enjoy!!

状态:

deletedopen
deletedopen

编辑: iRobot ,

文本:

Remove the Power Supply.  Right next to the heat sink is a plateau.   There is  a notch in the power supply to avoid it...on the side opposite the power supply's wires.  Place 2 Irwin Utility Knife Blades on the plateau, so that the power supply will apply the pressure for you.  Retighten the powersupply.  Enjoy!!

状态:

opendeleted
opendeleted

原帖由: anonymous 4923 ,

文本:

Remove the Power Supply.  Right next to the heat sink is a plateau.   There is  a notch in the power supply to avoid it...on the side opposite the power supply's wires.  Place 2 Irwin Utility Knife Blades on the plateau, so that the power supply will apply the pressure for you.  Retighten the powersupply.  Enjoy!!

状态:

open