跳转到主内容
帮助

原帖由: oldturkey03 ,

文本:

Mimi B, here is my answer to a similar question " I would get to the "tummy switch" and check the circuit from there. You do have a couple of choices here. Check the switch, then the speaker. Check the connector for both. You will need a multimeter to check those. Follow the schematic to work on your Furby's voice, and check [http://www.phobe.com/furby/auto1.html|on here] for directions on how to skin the Furby."  It is possible that you have a bad speech processor on your Furby, but check the components first   Hope this helps, good luck.

[image|306343|align=center]

状态:

open