跳转到主内容

修复你的物品

维修的权力

商店

帮助

原帖由: Tractionist ,

文本:

Poor contacts are always a big problem with low voltage D.C.  a) because voltage = 'pressure' and any limited resistance [i.e. dirty contacts within the camera or on the batteries] will impede the flow of electrical current, and b) direct current tends to 'plate' any metal connections/contacts [read: fur them up].  So - thoroughly clean all connections with Isopropyl Alcohol.  Also [as mentioned by others] gently re-tension the camera battery bay contacts and if possible fit a small pad of very thin foam rubber underneath each.  I did this with my Fujifilm A700 [which has been annoying me for ages] and it's been fine ever since.

状态:

open