跳转到主内容
帮助

当前版本: Sam Goldheart (投票详情) ,

文本:

Hi, this is a very common issue.

You will need to disassemble the ipod by loosing up the adhesives at the bottom and separating the glass from the adhesives. Once that's done you can use a metal tool to un lip the plastic frame that holds the glass and lift it. You can reference the disassembly guide.

Then you will see where the home button used to be. There should be a little black dot which is normally glued to the yellow kapton tape.

If the dot is not there (which it sounds like it is not) you need to find it or find a replacement for it which you can then glue in the middle of the home button and after that it should click and will work normally after.

状态:

deletedopen
deletedopen

编辑: iRobot ,

文本:

Hi, this is a very common issue.

You will need to disassemble the ipod by loosing up the adhesives at the bottom and separating the glass from the adhesives. Once that's done you can use a metal tool to un lip the plastic frame that holds the glass and lift it. You can reference the disassembly guide.

Then you will see where the home button used to be. There should be a little black dot which is normally glued to the yellow kapton tape.

If the dot is not there (which it sounds like it is not) you need to find it or find a replacement for it which you can then glue in the middle of the home button and after that it should click and will work normally after.

状态:

opendeleted
opendeleted

原帖由: YoloRepair ca ,

文本:

Hi, this is a very common issue.

You will need to disassemble the ipod by loosing up the adhesives at the bottom and separating the glass from the adhesives. Once that's done you can use a metal tool to un lip the plastic frame that holds the glass and lift it. You can reference the disassembly guide.

Then you will see where the home button used to be. There should be a little black dot which is normally glued to the yellow kapton tape.

If the dot is not there (which it sounds like it is not) you need to find it or find a replacement for it which you can then glue in the middle of the home button and after that it should click and will work normally after.

状态:

open