跳转到主内容
帮助

原帖由: markus weiher ,

文本:

I would not go that far an thay that everything is ruined.

there are a few things to do when a device like that has a fluid damage.

first of all, get the opening tools, some isopropyl alcohol (>90%) or an electronics cleaner and a soft paintbrush.

use the [guide|1127|logic board guide of the 2nd generation iPod touch] to disassemble your's.

check everything for fulid residue, it looks white/greenish and is conductive - so it shortens the parts and thats why most damaged devices won't work properly.

remove this resifure with the alcohol/paintbrush - but be careful - the parts inside the iPod are fragile. don't forget to check the connectors too. after you're done - let it dry - let it good dry, don't use a hair dryer and then reassemble it and start the device.

good luck

状态:

open