跳转到主内容

修复你的物品

维修的权力

商店

帮助

当前版本: Jeff Suovanen ,

文本:

I had the exact issue and panicked because I didn't do a backup of my fiancé's phone before I did the screen replacement. When I plugged in the phone to my laptop, it appeared as a connected device and showed all the correct information related to the phone. The screen went black, and only made a repeating charging beep and a vibration when I would turn the sound on and off. Below are the steps that I took:
 
-Removed the bottom 2 screws
 
-Elevated the screen (did not detach the screen)
 
-Removed the shield that connects the battery to the main board
 
-Disconnected the battery
 
-Held down the power button at the top of the phone to remove any remaining power
 
-Reconnected the battery
 
-Placed the shield back
 
-Reconnected the screen to the phone
 
-Powered on to test and BOOM!!
 
It was working like new and immediately did a full backup.
 
I really hope this helps you with your issue. If not, try some of the other solutions on the [https://www.ifixit.com/Wiki/iPhone_Won%27t_Turn_On|iPhone won’t turn on] wiki. Good luck!
I really hope this helps you with your issue. If not, try some of the other solutions on the [https://www.ifixit.com/Wiki/iPhone_Won%27t_Turn_On|iPhone won’t turn on] wiki. Good luck!

状态:

open

编辑: Ron Davis ,

文本:

I had the exact issue and panicked because I didn't do a back upbackup of my fiancéfiancé's phone before I did the screen replacement. When I plugged in the phone to my laptoplaptop, it appeared as a connected devicesdevice and showed all the correct information related to the phone. Below are the steps that I took after theThe screen went blackblack, and only made a repeating charging beep and a vibration when I would turn the sound on and offoff. Below are the steps that I took:
I had the exact issue and panicked because I didn't do a back upbackup of my fiancéfiancé's phone before I did the screen replacement. When I plugged in the phone to my laptoplaptop, it appeared as a connected devicesdevice and showed all the correct information related to the phone. Below are the steps that I took after theThe screen went blackblack, and only made a repeating charging beep and a vibration when I would turn the sound on and offoff. Below are the steps that I took:
 
-Removed the bottom 2 screws
 
-Elevated the screen (did not detacheddetach the screen)
-Elevated the screen (did not detacheddetach the screen)
 
-Removed the shield that connects the batterbattery to the main board
-Removed the shield that connects the batterbattery to the main board
 
-Disconnected the battery
-Disconnected the battery
 
-Held down the power button at the top of the phone to remove andany remaining power
-Held down the power button at the top of the phone to remove andany remaining power
 
-Reconnected the battery
-Reconnected the battery
 
-Placed the shield back
-Placed the shield back
 
-Reconnected the screen to the phone
-Reconnected the screen to the phone
 
-Powered on to test and BOOM!!
 
WorkingIt was working like new and immediately did a full back upbackup.
WorkingIt was working like new and immediately did a full back upbackup.
 
I really hope this helps you with your issue.

状态:

open

原帖由: nellyson112 ,

文本:

I had the exact issue and panicked because I didn't do a back up of my fiancé phone before I did the screen replacement. When I plugged in the phone to my laptop it appeared as a connected devices and showed all the correct information related to the phone. Below are the steps that I took after the screen went black and only made a repeating charging beep and a vibration when I would turn the sound on and off:

-Removed the bottom 2 screws

-Elevated the screen (did not detached the screen)

-Removed the shield that connects the batter to the main board

-Disconnected battery

-Held down the power button at the top of the phone to remove and remaining power

-Reconnected battery

-Placed shield back

-Reconnected screen to the phone

-Powered on to test and BOOM!!

Working like new and immediately did a full back up.

I really hope this helps you with your issue.

状态:

open