跳转到主内容
帮助

当前版本: Jonathan James ,

文本:

You can unweld the shield from the board with flux and perhaps a little solder(only if needed) . Make sure you are giving the weld as much of your solder tip as possible. I would reccomendrecommend a tip like the one all the way to the right in this image http://ecx.images-amazon.com/images/I/41HzDacAeOL.jpg
You can unweld the shield from the board with flux and perhaps a little solder(only if needed) . Make sure you are giving the weld as much of your solder tip as possible. I would reccomendrecommend a tip like the one all the way to the right in this image http://ecx.images-amazon.com/images/I/41HzDacAeOL.jpg
 
I am not sure that this would be in any way cost effective to do this repair however on an iPhone 4s.
 
Jon

状态:

open

原帖由: Jonathan James ,

文本:

You can unweld the shield from the board with flux and perhaps a little solder(only if needed) . Make sure you are giving the weld as much of your solder tip as possible. I would reccomend a tip like the one all the way to the right in this image http://ecx.images-amazon.com/images/I/41HzDacAeOL.jpg

I am not sure that this would be in any way cost effective to do this repair however on an iPhone 4s.

Jon

状态:

open