跳转到主内容
帮助

当前版本: jessabethany ,

文本:

"It only boots up when connected to the charge cable" is key.
This means that your battery is not connected--which may explain most of your other problems. Hopefully, you just need to reseat the battery, but it is very common to actually tear a solder connection of the battery connector to the motherboard---can be repaired, but you may wish to seek a professional.
The dark LCD is most likely not connected properly, or the connector is damaged. Take a look carefully at the connector under magnification, clean the connector, and try again. The original problem (blocks at top) is also caused by a connector misfit.
You can try connecting the old screen lcd only and not worrying about the digitizer.
Good luck
Jessa
+ == Update ==
+
+ PS: the bong noise is the phone prompting you for input that you can't provide with the screen non functional
+
+
+
+Keep us posted
+
+Jessa

状态:

open

原帖由: jessabethany ,

文本:

"It only boots up when connected to the charge cable" is key.

This means that your battery is not connected--which may explain most of your other problems.  Hopefully, you just need to reseat the battery, but it is very common to actually tear a solder connection of the battery connector to the motherboard---can be repaired, but you may wish to seek a professional.

The dark LCD is most likely not connected properly, or the connector is damaged.  Take a look carefully at the connector under magnification, clean the connector, and try again.  The original problem (blocks at top) is also caused by a connector misfit.

You can try connecting the old screen lcd only and not worrying about the digitizer.

Good luck

Jessa

状态:

open