跳转到主内容
帮助

当前版本: oldturkey03 ,

文本:

chermarcol, this might work for you " Open the door and remove all the screws (Torx T20 driver needed) around the border of the inner door liner to separate the door. '''DO NOT''' remove the screw by each hinge near the bottom. Loosen them but don't unscrew them all the way, or the door will fall into pieces and you will have problems getting it back together.
 
Separate the door and pull the control panel off the front panel. There are 2 screws coming in from the side of the control panel that you need to remove as well. There are 3 plastic tabs at the bottom of the control panel. Push these in with a flat head screwdriver so that you can remove the control board." from [http://www.justanswer.com/appliance/2lxwq-hello-i-bosch-dishwasher-shu5315uc-u06.html|here.] Hope this helps, good luck.
 
[image|307526]

状态:

open

原帖由: oldturkey03 ,

文本:

chermarcol, this might work for you  " Open the door and remove all the screws (Torx T20 driver needed) around the border of the inner door liner to separate the door. '''DO NOT''' remove the screw by each hinge near the bottom. Loosen them but don't unscrew them all the way, or the door will fall into pieces and you will have problems getting it back together.

Separate the door and pull the control panel off the front panel. There are 2 screws coming in from the side of the control panel that you need to remove as well. There are 3 plastic tabs at the bottom of the control panel. Push these in with a flat head screwdriver so that you can remove the control board." from [http://www.justanswer.com/appliance/2lxwq-hello-i-bosch-dishwasher-shu5315uc-u06.html|here.] Hope this helps, good luck.

状态:

open