原帖由： Sheldon Carpenter ,
This is regarding the small, grey plastic slotted mounts that fit onto the metal frame around the LCD screen. When you remove the bezel, they often come off with the bezel rather than stay in the mounting holes. I pop them off the bezel by placing my thumb over them then prying them off the bezel tab with a thin blade. To attach them back to the LCD frame, place one end in the hole, then gently press toward the inserted end so it arches upward slightly, allowing for the other end to snap down into the hole. I use a spudger or a chopstick to exert the backwards pressure and press down with my finger. Do not try to just mash them into the holes as this will merely bend the attachment tabs and potentially break them. I still use double-sided tape to hold the bezel in place.