跳转到主内容
帮助

原帖由: Josh Wright ,

文本:

Hello, I have come across this before and encountered problems after getting it functioning again. What I did is take it apart by using the guide on this site [guide|6554] then I put the logic board and battery and LCD and Digitizer into a bowl of rice (Keep it in here for a few days). After this the LCD was not functioning properly so I bought a replacement but you have to purchase the digitizer and an LCD as they are hard to remove from each other.

I see you have mentioned using rice but it does not matter when it is put into rice just as long as it is. The sooner the better obviously.

Hope I helped :)

状态:

open