跳转到主内容
帮助

当前版本: 040304 ,

文本:

It sounds like it is stripped and you have a few options.
-1. Try to pry the door out anyway with the screw in there. Chances are with the stripped threads on the
-
-screw, it will come out and you can push the screw out from the back.
+1. Try to pry the door out anyway with the screw in there. Chances are with the stripped threads on the screw, it will come out and you can push the screw out from the back.
2. Try to use an [http://www.amazon.com/Easy-Out-Screw-Extractor-Set/dp/B0002SDAIY|easy out tool] if you can find one small enough.
3. Drill it out carefully
4. Grind it out with a dremel.
5. Use a [http://www.amazon.com/Irwin-30520-Cobalt-64-Inch-Assortment/dp/B0002NYBJG|left handed drill bit] to help it out.
Option 3, 4 and 5 will require to find an alternative to refastening when you are done.
Good Luck,
Frank

状态:

open

原帖由: 040304 ,

文本:

It sounds like it is stripped and you have a few options.

1.  Try to pry the door out anyway with the screw in there.  Chances are with the stripped threads on the

screw, it will come out and you can push the screw out from the back.

2.  Try to use an [http://www.amazon.com/Easy-Out-Screw-Extractor-Set/dp/B0002SDAIY|easy out tool] if you can find one small enough.

3.  Drill it out carefully

4.  Grind it out with a dremel.

5.   Use a [http://www.amazon.com/Irwin-30520-Cobalt-64-Inch-Assortment/dp/B0002NYBJG|left handed drill bit] to help it out.

Option 3, 4 and 5 will require to find an alternative to refastening when you are done.

Good Luck,

Frank

状态:

open