跳转到主内容
帮助

当前版本: oldturkey03 ,

文本:

Eric, it is possible that your camera is having with the Speed Class 10. You may need a firmware update. I would suggest you try either a class 3 or a class 6 card and see if that will work. Here is a bit more information I found about your card "The limitation of this card is that it normally operates at 20MB/s and only achieves 30MB/s in the few devices that support UHS-I. If your device doesn't specifically state "UHS-I", try a more "normal" version. This is based on research and responses from SanDisk. Hope this helps, good luck.
Eric, it is possible that your camera is having with the Speed Class 10. You may need a firmware update. I would suggest you try either a class 3 or a class 6 card and see if that will work. Here is a bit more information I found about your card "The limitation of this card is that it normally operates at 20MB/s and only achieves 30MB/s in the few devices that support UHS-I. If your device doesn't specifically state "UHS-I", try a more "normal" version. This is based on research and responses from SanDisk. Hope this helps, good luck.

状态:

open

原帖由: oldturkey03 ,

文本:

Eric, it is possible that your camera is having with the Speed Class 10. You may need a firmware update. I would suggest you try either a class 3 or a class 6 card and see if that will work. Hope this helps, good luck.

状态:

open