<![CDATA[iFixit - Answers With Device "e-pm2"]]> https://zh.ifixit.com/Answers/Device/e-pm2?rss=yes en-US Mon, 08 Jun 2026 02:38:57 -0700 <![CDATA[e-pm2: It will switch on but I can't use it. It shows a photo of a folder.]]> It has power but it only shows a photo of a folder. That's all.

⟐ Answered 六月 07, 2026 at 8:51 GMT-7

]]> https://zh.ifixit.com/Answers/View/958627/It+will+switch+on+but+I+can't+use+it.+It+shows+a+photo+of+a+folder. https://zh.ifixit.com/Answers/View/958627 Sun, 07 Jun 2026 08:51:42 -0700 <![CDATA[e-pm2: Camera won't turn on. Used to force close, now -- nothing!]]> I haven’t turned this camera on for about 3 years. It used to have a problem where it would only stay on for a few seconds, then shut itself off. I could usually take a few photos in this time. Now nothing happens when I press the power button.


I have tried:

- bending up the battery connectors

- bending up the small switch by the battery door (hopefully that helps it recognize the battery?)

- putting rubbing alcohol (90%) near the power button and shutter button

- using a small air blower around the ports and buttons, and then a hair dryer on cool

- opening it up and looking for problems (nothing visible to me, but only the back was accessible)

- running a piece of paper under the power button, to dislodge anything?

- just whackin’ it


I don’t know what to look for in the shutter if that’s a potential issue. I’ve looked on the forums here for different camera power issues and tried the ideas I found there, but haven’t even found one where the camera doesn’t respond at all to power.


Would love any help! Thank you!

]]> https://zh.ifixit.com/Answers/View/636448/Camera+won't+turn+on.+Used+to+force+close,+now+--+nothing! https://zh.ifixit.com/Answers/View/636448 Thu, 21 May 2020 21:26:30 -0700