I am not sure if anyone can help with this, but thought I'd check here anyway. I have been trying to find a cause for this issue for months and have found no solutions whatsoever.

This has happened in both Chrome and Edge, so I know it must be a Windows issue. So, when I am in my browser, and I am doing work, being productive, without any clear cause, the browser page will revert back to the previous page. In some of the work I do, this results in lost work and having to start over which is highly annoying and results in a lot of wasted time and aggravation.

It does not have anything to do with my mouse or keyboard, as both of those have been replaced and it has not solved the issue. There are no keyboard hotkeys assigned to move the browser page forward or back. I don't use the touchpad but no gesture settings are assigned to perform this function. I am at my wit's end and am seriously considering switching my whole set up to my Mac mini, which would be a hassle but I am so tired of this happening with no fix or useable advice.

I have searched the internet many times for a solution, and this seems to have been an ongoing issue with Windows on different PCs for a long time from what I can see, so I am hesitant to say that it is only an issue with my specific computer.

Has this happened to anyone else, and did you ever find a solution? The most advised solution from any kind of support has been to do a clean Windows install which seems like a huge deal with no guarantee of a fix.

⟐ Commented 五月 21, 2026 at 8:50 GMT-7

⟐ Edited 四月 01, 2026 at 0:18 GMT-7

⟐ Commented 十二月 02, 2025 at 2:03 GMT-7

⟐ Answered 十月 01, 2025 at 20:41 GMT-7

I have some problems with my Windows 11. I only get Errrors when i try to uppdate or Restore my iphones. Is it some drivers or some other things i need to do. To get it work in Windows 11. Worked just fine when i had Windows 10. But something is realy wrong in my Windows 11 Pro.

/ Markus

⟐ Commented 九月 05, 2025 at 5:46 GMT-7

The rest of the unit is as follows: 1TB WD Black (pulled from the old PC, so this is the second run—54k hours), 250GB SATA SSD, 16GB RAM, Radeon RX—the PC literally makes it short of the CPU :-(. I may be able to put a used Ryzen 5 2600 in so I can tell Microsoft where to shove it, but I don't want to chance it being a dud, so that's something I would probably try if I got it, but not in production.

Given how close it is, if I have to do the unsupported upgrade, are the odds of an issue something that warrants grave concern high? Either way is a wipe and reload by nature due to how I bypass it. If it were something I was still running, I would have bypassed it given how close it is and assumed the risk, but there's a little more caution needed for others. I HAVE seen it go south on bad chips like the A10-4755M when I tested my procedure on grossly unsupported hardware. It was unusable, but the PC was borderline unusable on Win8 and Win10, so that was what I expected.

⟐ Commented 八月 21, 2025 at 21:59 GMT-7

Thank you for the help

⟐ Answer accepted 二月 12, 2025 at 20:15 GMT-7

⟐ Answered 十一月 12, 2024 at 6:06 GMT-7

I used cmd to get into my bios but id still like to fix the issue of no output

⟐ Commented 十一月 03, 2024 at 11:54 GMT-7

⟐ Answered 十一月 03, 2024 at 6:19 GMT-7

I have Win 10 and Win 11 installed on 2 different drives. Disk 2 is the original drive with Win10 and I later installed Win 11 onto Disk 1,

Now I want to make a standalone bootable drive for my Windows 11. But I'm having trouble. If I clone the entire Disk 1 it won't boot from that disk. I imagine it needs the EFI partition from Disk 2. So I tried cloning that partition to disk 3 alongside the Win11 partition plus a bunch of other variations but nothing is working.

What do I need to do in order to copy my Win11 to a new hard disk and boot from that disk only. I dont want the Data drive (disk1, part2) copied, I want to keep that separate.

⟐ Commented 十月 27, 2022 at 18:49 GMT-7

⟐ Answer accepted 九月 19, 2022 at 6:51 GMT-7

⟐ Answer accepted 七月 21, 2022 at 12:18 GMT-7

⟐ Answered 六月 27, 2022 at 11:56 GMT-7