iFixit - Answers With Device "Toy"

Big Trak: 遥控玩具主板是标的9.6v但是上了9.6v电池开机动了一会就不动了，用3.7v可以正常

Tue, 30 Sep 2025 18:57:14 -0700

遥控玩具主板是标的9.6v但是上了9.6v电池开机动了一会就不动了，用3.7v可以正常动但是打开音频按钮后不能正常按动，关闭声音可以前后移动

Toy: Paw patrol life size look out- how to dismantle

Mon, 31 Aug 2026 14:07:25 -0700

My child has clicked the plastic periscope in place before the roof was put in and it is now stuck- how do I remove the plastic without breaking the toy so I can assemble it properly?!

⟐ Answered 八月 31, 2026 at 14:07 GMT-7

Red Ryder BB Gun: Where is my bb guns cereal number

Fri, 28 Aug 2026 20:17:55 -0700

where is the cereal number on a 4.5mm red ryder youth sized bb gun?

⟐ Commented 八月 28, 2026 at 20:17 GMT-7

Toy: How to disassemble Kidoozie Funtime Tractor

Fri, 28 Aug 2026 06:37:11 -0700

I have purchased 3 of these now for the grandkids. The motor for the axle runs but there is a cog somewhere that is skipping and not letting the tractor move forward. Has anyone taken one of these apart?

Tamagotchi: Where to find replacement USB C port for Tamagotchi Uni

Mon, 24 Aug 2026 19:21:32 -0700

I have a Tamagotchi Uni I got from someone who fried the USB port with the wrong power adapter. From what I can tell the board is still fine, I just need to replace the USB port. I can't seem to find a replacement part for the USB C port though. It looks like it has 6 pins. Anyone know where to find a replacement port? I can solder the new one once I have the part.

⟐ Answered 八月 24, 2026 at 19:21 GMT-7

Kano Computer Kit Complete: Is it possible to use the display on it as a second monitor?

Sat, 22 Aug 2026 21:53:49 -0700

I got one of these a couple years ago and would like to turn there monitor on it into a second monitor.

⟐ Commented 八月 22, 2026 at 21:53 GMT-7

Nerf Gun: How do I fix my roughcut 2x4?

Thu, 13 Aug 2026 03:32:23 -0700

My roughcut 2x4 pump action isn't working at all and I think internals are broken too , although I am not sure

Spin Master Boxer: Lost cards/app failure

Sat, 08 Aug 2026 03:27:06 -0700

So, I tried to download a copy of the cards from the website, but it doesn't seem to exist. I also couldn't find a copy of the app anywhere. any help finding the website, or an image of the cards would be great. thx.

⟐ Commented 八月 08, 2026 at 3:27 GMT-7

Kite: How to make a new kit

Thu, 06 Aug 2026 09:32:28 -0700

How to make new kit

⟐ Answer accepted 八月 06, 2026 at 9:32 GMT-7

Hasbro furby 2012: Why is my furby not working? And when I shake it, somthings loose :(.

Sat, 01 Aug 2026 10:24:06 -0700

So I’ve had this furby for quite a while. Its from the crystal collection or what it called and hasn’t worked for like 2-4 years. I’ve switched batteries but that didn’t work. So please how do i fix it?

Teddy Ruxpin: My Teddy Ruxpin does not play cassettes properly, please Help!

Sat, 18 Jul 2026 09:13:09 -0700

Hi,

My Teddy Ruxpin plays the tape and moves its mouth and eyes just fine. However, when Teddy is telling the story he will not produce any sound (or very low in and out static sound) every few seconds. When I tap the volume dial or lean it against something, or just fidget with it , the sound comes back and Teddy is speaking much better. I cannot get him to tell the story audibly for more than a few seconds at a time and without my messing with the dial.

The other issue is sometimes the tape will stop and the cassette deck will open slightly and then I have to close it again.

Any advice would be appreciated.

Or, if he needs repairs I am happy to hear your referrals of places I can bring him to possibly repair these issues.

Thank you in advance for your help.

Regards,

Nicole

c/o Jack J.

⟐ Commented 七月 18, 2026 at 9:13 GMT-7

Furby: New out of box 1998 furby not talking or making sound.

Sat, 11 Jul 2026 04:08:35 -0700

Just took it out of the packaging first time ever. I put brand new batteries in it as well. It moves and wiggles but does not talk or make any noise.... what is wrong?!? do i need a new speaker?? This one has never been used....ever.... =(

⟐ Commented 七月 11, 2026 at 4:08 GMT-7

The Claw: How to open the gear box or re-thread the chain on The Claw?

Thu, 09 Jul 2026 12:12:45 -0700

I am trying to repair the chain on my 'The Claw' arcade toy because it is jammed. I have already followed the guides to remove the top cover and the internal top flange (Step 7 of the Claw Replacement guide), but I cannot see how to access the internal chain assembly or the gear box to re-thread the chain.

The chain seems to be stuck or disconnected inside the motor/gear box housing. Does anyone know how to safely open the gear box or re-thread the chain onto the internal pulleys once the top flange is removed? Any photos or tips on the internal pulley configuration would be greatly appreciated!

Furby: How can I fix for my furby does not speak?

Thu, 09 Jul 2026 02:44:14 -0700

My Furby doesn't not speak and only does the movement.

I thought that it is because of low battery.

Then I changed with new batteries.

But it still doesn't speak.

⟐ Answered 七月 09, 2026 at 2:44 GMT-7

Mr. Potato Head: Grinding sound won't move

Mon, 06 Jul 2026 05:27:34 -0700

My Toy Story Collection talking mr potato won't move his legs like it's supposed to and is making a grinding sound how to fix it

⟐ Commented 七月 06, 2026 at 5:27 GMT-7

Anki Cozmo: My Cozmo's screen shows snow when I try to use it.

Wed, 01 Jul 2026 09:09:21 -0700

Instead of a password, I see snow on Cozmo's screen when he's on the charger. His head is also tilted up. How can I try to troubleshoot?

Toy: Como consertar motinha elétrica infantil

Tue, 30 Jun 2026 10:52:37 -0700

Conserto mortinho

Nerf Recon CS-6: The spring needs to kinda pop out to work. Why?

Mon, 29 Jun 2026 00:37:13 -0700

I found this amazing rifle (imo) and I love it. But it's had seem problems I've mostly fixed. My current issue is the fact that the spring kinda has to push out a bit for it to fully pull back. I haven't reallyyy had this issue much up until recently. I have no clue why it started NOW. I need some guidance

Teddy Ruxpin: Servo motor not responding to battery.

Sun, 28 Jun 2026 11:21:51 -0700

I have a version 1 teddy I am trying to restore. I’ve got his eyes and lower jaw to respond when hooked up to a battery, but the upper jaw isn’t responding at all. Gears are rotating freely by hand. Any suggestions on what to do next?

Tiger Furby 1998: 1998 Furby Motor / Gears Seizing (?) after jump, anybody know a fix?

Thu, 25 Jun 2026 08:51:22 -0700

Hey! I recently purchased a NIB 1998 Snow Leopard Furby (WT code), which did not work out of the box. I anticipated a relatively simple jumpstart (the typical methods of whacking the battery compartment or skinning it & spinning the black horizontal gear with a screwdriver, if the first thing didn't work). While spinning the gear did eventually wake it up, it seems like something's causing either the gears or the motor to get stuck at random, particularly when it's flipped upside down. I dabbed a very small amount of 3-in-1 all-temp silicone lubricant (which shouldn't damage the plastic) on the teeth of the gears (not the shafts, since one of the very few sources I could find said not to do this) with a cotton swab, and that didn't seem to have an effect on the seizing (though I'm not sure if I used enough). I noticed when I was initially spinning the gear, it would catch and become hard to spin for a moment, then return to normal once slightly adjusted. Could the issue be that one of the gears is defective, is the motor the problem, or could it be something like a corroded wire / some other kind of disconnect? I know these guys are prone to motor issues, especially after being dormant for as long as this one, but to me it sounds like that's working fine (everything else functions as intended when it's not frozen). I took care not to deform or otherwise damage the gear, so I don't think that could have caused it. I couldn't find this issue talked about anywhere, and I'm not very familiar with Furbys or small hardware as a whole, so I figured I'd give iFixit a shot. Any advice is appreciated! :]

Here's a video with an example of the sound it makes when it gets stuck:

I don't let it do this for longer than about 20 seconds at a time, for fear of it overheating; nothing stops it except for removing the batteries.

⟐ Answered 六月 25, 2026 at 8:51 GMT-7