<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0"
           xmlns:content="http://purl.org/rss/1.0/modules/content/"
           xmlns:wfw="http://wellformedweb.org/CommentAPI/"
          >
<channel>
<title><![CDATA[iFixit - Answers With Device &quot;Small Engine&quot;]]></title>
<link>https://zh.ifixit.com/Answers/Device/Small_Engine/All?rss=yes</link>
<description><![CDATA[Top Questions according to your query. Only showing &quot;Small Engine&quot; questions.]]></description>
<language>en-US</language>
<pubDate>Wed, 08 Apr 2026 18:39:54 -0700</pubDate>
<item>
<title><![CDATA[Briggs and Stratton 675 Series Repair: My Toro self propelled lawn mower starts right up and then dies.]]></title>
<description><![CDATA[<p>My engine starts up and runs for a few seconds and then dies. I've clean my carburetor and took the float bowl off and cleaned it out.  The bowl had a small pieces of a gel substance in it. I removed the carb and the float bowl and blew them all out. Also took the float of and needle valve and blew out the carb.  I've checked  the fuel lines and no cracks. Put it back together and it does the same thing. Any suggestions??</p>

<p>⟐ Commented 三月 10, 2026 at 16:47 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/415266/My+Toro+self+propelled+lawn+mower+starts+right+up+and+then+dies.</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/415266</guid>
<pubDate>Tue, 10 Mar 2026 16:47:06 -0700</pubDate>
</item>
<item>
<title><![CDATA[Small Engine: Why is the sound of engine is like going to off]]></title>
<description><![CDATA[<p>when i start the engine and put the choke in the center and i notice the sound of engine is like it is going to off like the sound is high and going low and high</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/935936/Why+is+the+sound+of+engine+is+like+going+to+off</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/935936</guid>
<pubDate>Tue, 13 Jan 2026 22:15:29 -0700</pubDate>
</item>
<item>
<title><![CDATA[Honda General Purpose Motor GX160UT2  202002: It turn on. It will rev high]]></title>
<description><![CDATA[<p>I have adjusted the carburetor and governor. It seems to still rev high.</p>

<p>⟐ Answered 十二月 23, 2025 at 16:50 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/727815/It+turn+on.+It+will+rev+high</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/727815</guid>
<pubDate>Tue, 23 Dec 2025 16:50:55 -0700</pubDate>
</item>
<item>
<title><![CDATA[Briggs and Stratton 675 Series Repair: Won’t start not getting gas does it have a fuel filter]]></title>
<description><![CDATA[<p>Does not seem to be getting fuel</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/931967/Won%E2%80%99t+start+not+getting+gas+does+it+have+a+fuel+filter</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/931967</guid>
<pubDate>Mon, 22 Dec 2025 14:25:08 -0700</pubDate>
</item>
<item>
<title><![CDATA[Briggs and Stratton 675 Series Repair: How do I replace the plug wire and components?]]></title>
<description><![CDATA[<p>My plug wire is completely missing and I want to install a new one</p>

<p>⟐ Answered 十二月 20, 2025 at 8:16 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/931591/How+do+I+replace+the+plug+wire+and+components</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/931591</guid>
<pubDate>Sat, 20 Dec 2025 08:16:48 -0700</pubDate>
</item>
<item>
<title><![CDATA[Small Engine: Key in the flywheel keeps sheering off.]]></title>
<description><![CDATA[<p>B &amp; S 17.5 hp on old Craftsman riding mower. I replaced the stator and now the key in the flywheel keeps sheering off.</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/931518/Key+in+the+flywheel+keeps+sheering+off.</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/931518</guid>
<pubDate>Fri, 19 Dec 2025 11:43:21 -0700</pubDate>
</item>
<item>
<title><![CDATA[Briggs and Stratton 675 Series Repair: What is the start position of the throttle on my pressure washer]]></title>
<description><![CDATA[<p>For starting what position should the throttle be at</p>

<p>⟐ Commented 八月 14, 2025 at 17:42 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/912007/What+is+the+start+position+of+the+throttle+on+my+pressure+washer</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/912007</guid>
<pubDate>Thu, 14 Aug 2025 17:42:00 -0700</pubDate>
</item>
<item>
<title><![CDATA[Honda General Purpose Engine GX200UT2: engine wont turn on]]></title>
<description><![CDATA[<p>whenever i try to turn on engine it sputters a little but never starts</p>

<p>⟐ Answer edited 七月 28, 2025 at 16:14 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/908863/engine+wont+turn+on</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/908863</guid>
<pubDate>Mon, 28 Jul 2025 16:14:36 -0700</pubDate>
</item>
<item>
<title><![CDATA[Small Engine: carburetor clogged with old ethonal gas]]></title>
<description><![CDATA[<p>how to I clean out a carburetor gummed up with old gas.  The engine is a Kohler Courage SV470-610</p>

<p>⟐ Commented 七月 19, 2025 at 21:29 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/357686/carburetor+clogged+with+old+ethonal+gas</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/357686</guid>
<pubDate>Sat, 19 Jul 2025 21:29:23 -0700</pubDate>
</item>
<item>
<title><![CDATA[Briggs and Stratton 675 Series Repair: Can someone post a picture of the throttle mechanism/springs?]]></title>
<description><![CDATA[<p>I just recently took my B&amp;S 675 apart to clean and check some things and in the midst of putting the engine back together one of the two &quot;springs&quot; for the throttle cable that connects to the carburetor came off. I can not for the life of me figure out how to put the bastard back on correctly, can anyone post a picture of the throttle cable springs connecting to the carburetor on this engine? This engine is on my Briggs &amp; Stratton Earthquake auger with the 675 series engine.</p>

<p>Thank you!</p>

<p>⟐ Commented 五月 24, 2025 at 13:55 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/292224/Can+someone+post+a+picture+of+the+throttle+mechanism-springs</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/292224</guid>
<pubDate>Sat, 24 May 2025 13:55:44 -0700</pubDate>
</item>
<item>
<title><![CDATA[Briggs and Stratton 675 Series Repair: Mower starts then dies.]]></title>
<description><![CDATA[<p>I cleaned the carb.  fuel line gets fuel. Carb has fuel in the bowl.  i have spark. if i put fuel into the carb it fires and then dies.  I dont think the carb is opening .  cant figure this out. Grass is getting tall.</p>

<p>⟐ Commented 五月 11, 2025 at 18:34 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/415572/Mower+starts+then+dies.</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/415572</guid>
<pubDate>Sun, 11 May 2025 18:34:10 -0700</pubDate>
</item>
<item>
<title><![CDATA[Small Engine: Husqvarna 128LD won't start]]></title>
<description><![CDATA[<p>Trimmer won't start.  New carburetor, new fuel lines and filter, new air filter, new gas/oil mix.  Primer works, bulb fills, gas goes to carb and through return line. Checked spark plug, and it was completely dry, even after many pulls at full choke.  Seems fuel isn't getting to the cylinder.  Anyone have ideas on what to check next?</p>

<p>⟐ Answered 四月 23, 2025 at 19:00 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/897210/Husqvarna+128LD+won&#039;t+start</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/897210</guid>
<pubDate>Wed, 23 Apr 2025 19:00:41 -0700</pubDate>
</item>
<item>
<title><![CDATA[Honda General Purpose Engine GX25: Oil and fuel ratio]]></title>
<description><![CDATA[<p>Do I mix the fuel with 4 stroke oil? If so what’s the ratio ?</p>

<p>⟐ Answered 四月 14, 2025 at 17:51 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/896055/Oil+and+fuel+ratio</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/896055</guid>
<pubDate>Mon, 14 Apr 2025 17:51:17 -0700</pubDate>
</item>
<item>
<title><![CDATA[Briggs and Stratton 675 Series Repair: How to stop oil flow from crankcase breather house to air filter port]]></title>
<description><![CDATA[<p>675 Series. Engine build  date 6/10. Runs a Huskee log splitter. Oil comes out onto the air filter from the crankcase breather hose when engine is running. Oil reservoir has NOT been over-filled. What's the fix? Also, when i enter the model # into the B/S website to obtain a manual, it says 'no matches found'. I have a serial # as well. Any clues on how to get a manual online?  Thanks.</p>

<p>⟐ Answer accepted 十二月 04, 2024 at 21:37 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/879100/How+to+stop+oil+flow+from+crankcase+breather+house+to+air+filter+port</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/879100</guid>
<pubDate>Wed, 04 Dec 2024 21:37:10 -0700</pubDate>
</item>
<item>
<title><![CDATA[4-Stroke Small Gas Engine: Jiang Dang C290 291cc engine]]></title>
<description><![CDATA[<p>I am looking for replacement parts for a Jiang Dang C290 291cc engine specifically the carberator and associated parts. The Carb is labeled  Huayi C290.9.1   Thanks for any help!</p>

<p>⟐ Commented 十月 21, 2024 at 15:57 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/874337/Jiang+Dang+C290+291cc+engine</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/874337</guid>
<pubDate>Mon, 21 Oct 2024 15:57:39 -0700</pubDate>
</item>
<item>
<title><![CDATA[Small Engine: Briggs 19G417 1181-E1 engine runs on 1/2 choke kind of?]]></title>
<description><![CDATA[<p>Finally got the engine to start for more than a chug and die. If I feather the choke it stays running but it's like it is missing and as soon as it is slid to RUN it dies. Even got it to stay running at 1/2 choke but it was sputtering and what seemed like high RPM??? <br /><br />Has a new carb and am also wondering how many turns the mixture screw is usually in/out? Messing with that got it running this far but far from perfect. <br /><br />This is all on a Coleman Powermate Magna Force 5000 generator.</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/856249/Briggs+19G417+1181-E1+engine+runs+on+1-2+choke+kind+of</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/856249</guid>
<pubDate>Sun, 23 Jun 2024 16:53:50 -0700</pubDate>
</item>
<item>
<title><![CDATA[Small Engine: lawn tractor gas leak]]></title>
<description><![CDATA[<p>My 20 years old Murray 425600X8A ran ok before. It went bad after a small engine shop performed the tune up and changed to a mulching blade. The tractor exhaust pipe spitted gas when started, and blew a huge of white smoke then halted. The shop took the tractor back and suggested to get the engine rebuild. I don't want to spend more $ and took the tractor back. Found the fuel pipe to the carburetor was loose so I plugged it back. It is a Briggs Stratton model 31D777 type 0235E1. Ordered a fuel line clamp and try to fix it myself. I plan to rise the cutting height since the shop lowered it before. Any advice/s helping me to diagnose/fix the problem/s will be appreciated.</p>

<p>⟐ Commented 六月 02, 2024 at 18:50 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/852026/lawn+tractor+gas+leak</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/852026</guid>
<pubDate>Sun, 02 Jun 2024 18:50:21 -0700</pubDate>
</item>
<item>
<title><![CDATA[Briggs and Stratton 675 Series Repair: Leaking oil out of the front of the motor where it says ohv?]]></title>
<description><![CDATA[<p>Leaking oil out of the front of the motor where it says ohv. What do I do to repair?</p>

<p>⟐ Commented 五月 09, 2024 at 17:08 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/703935/Leaking+oil+out+of+the+front+of+the+motor+where+it+says+ohv</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/703935</guid>
<pubDate>Thu, 09 May 2024 17:08:06 -0700</pubDate>
</item>
<item>
<title><![CDATA[Briggs and Stratton 675 Series Repair: My wheels spin in the air but don’t seem to be pulling the mower when]]></title>
<description><![CDATA[<p>My wheels spin in the air but don’t pull the lawnmower when on the ground</p>

<p>⟐ Commented 五月 01, 2024 at 9:26 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/847768/My+wheels+spin+in+the+air+but+don%E2%80%99t+seem+to+be+pulling+the+mower+when</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/847768</guid>
<pubDate>Wed, 01 May 2024 09:26:25 -0700</pubDate>
</item>
<item>
<title><![CDATA[Small Engine: Why wont my starter rope pull?]]></title>
<description><![CDATA[<p>Hi, so I started a DIY mini ATV project with a 49cc pocket bike engine about a year ago. I started it once, then it sat in my garage for a while. The other day, I tried to start it again. When I tried to start it, the pull rope came out a bit then got stuck. I tried to pull harder, but it wouldn’t move. I took the pull start assembly off, and it pulled fine. The starter flywheel turned when I  used a tool to push it. But as soon as I put the pull start assembly back on, it wouldn’t pull. Does anyone know what is wrong and how I could fix it?</p>

<p>Thanks in advance!</p>

<p>P.S I am only 13, so if the fix is obvious don’t judge. I don’t know much about this stuff.</p>

<p>⟐ Commented 三月 26, 2024 at 0:37 GMT-7</p>]]></description>
<link>https://zh.ifixit.com/Answers/View/557922/Why+wont+my+starter+rope+pull</link>
<guid isPermaLink="false" >https://zh.ifixit.com/Answers/View/557922</guid>
<pubDate>Tue, 26 Mar 2024 00:37:43 -0700</pubDate>
</item>
</channel>
</rss>