iFixit - Active Questions With Device "Meta VR"

Oculus Rift CV1: 关于oulcus cv1 拆解步骤5边框（thin plastic frame）如何取下来的问题

Tue, 05 Jul 2016 23:26:35 -0700

大家好，

我的cv1因为邮局这边运输。。导致耳机线掉出来了（如图：

），我需要拆开安回去，但是我按照拆解步骤在拆解到边框的时候（步骤5

Oculus Rift CV1 拆解），那个外边框怎么也拆不下来，边框周围的6个螺丝我都拆下来了，但是内测的卡扣卡在镜片上，解释图上画圈显示的地方（

）怎么也拆不下来。请问应该如何拆，用什么工具，才能把内测的卡扣拆下来。

谢谢

⟐ Answered 七月 05, 2016 at 23:26 GMT-7

Meta Quest 2: My vr says no commands and wont turn on with purple light

Sat, 25 Apr 2026 10:08:44 -0700

how do i fix it or do i gotta buy a new one

⟐ Commented 四月 25, 2026 at 10:08 GMT-7

Meta Quest 3: Disconnect built-in battery, What if you connect an external battery?

Thu, 16 Apr 2026 19:57:33 -0700

Disconnect the built-in battery,

If you connect an external battery,

Will it play normally?

⟐ Answer edited 四月 16, 2026 at 19:57 GMT-7

Meta Quest 3S: Stuck on USB Update Mode screen

Fri, 27 Mar 2026 07:27:47 -0700

Hi, I was hoping somebody can help advise me on how to resolve my Meta Quest 3s being stuck on USB Update Mode screen, I have performed a Factory reset and followed numerous videos relating to this issue on YouTube but the device keeps looping back to the USB Update Mode screen and I am unable to get passed it?

Thank you in advance

Meta Quest 3S: How to fix a meta 3S with no command and factory reset isn't working

Sun, 22 Mar 2026 10:57:56 -0700

It won't work

Meta Quest 3: What part(s) to replace?

Mon, 16 Mar 2026 12:04:04 -0700

On my third Quest 3 in 2 years 3 months. Replaced by Meta. They’ve all failed similarly in that they are working as expected, put on a charger and show boundary or tracking issues on next use. Software reinstall and factory restore either don’t solve the issue or brick the unit.

Current unit followed same flow except I’ve been able to get it partially working but not usable after multiple restores and software reinstalls.

it will boot but shows Finding Position in Room. Then without interaction it will show the menu bar at the bottoms, then flash back to Finding Position. Pass through works intermittently. When it does work the room has waves, jumps between zoomed to unzoomed views, sections of the room to sides flash in front of me, the view has fractures in it, there are what are best described as lightening bolts across the screen with combined views of what’s in front of me and to the sides. Menus, if I can get them to come up, slide in and out of view or change distances and positions, controller functionality is intermittent…the list goes on. I’m sometimes able to get it stable enough or click fast enough to get to some menu choices so have cleared and tried to reset the boundaries although redraw may not have completed. No experimental features are on so “lie down” is not enabled but I’ve been able to reset the experimental features (none were enabled)

No external damage to any of the cameras. The device has never been dropped. If i try long enough to work through menus the top front gets very warm/hot which I think is where the heat sink is located.

Is this all due to a failed tracking sensor? Bad mb? Both?

⟐ Answered 三月 16, 2026 at 12:04 GMT-7

Meta Quest 3: Charging pogo pinout - diy replacement of dock

Wed, 11 Mar 2026 08:56:43 -0700

I want to make myself a charging dock out of the box the headset came in but I'd need to know the pinout and possible handshake I would need to mimic. Could anyone who has the dock measure the voltages and see/record and communication over the data pin?

⟐ Commented 三月 11, 2026 at 8:56 GMT-7

Meta Quest 3S: My Meta Quest 3S has a black screen after recommend fix of a sensor

Wed, 11 Mar 2026 06:09:21 -0700

(I am an owner of a Meta Quest 3S and the problem at hand is that the headset is stuck In a black screen but what happens is that there is still audio and the use of menú buttons still emits sound and the start up animation still reproduces and the boot menu is still accessible and visible but menús, power options, turn off & on pop ups are not visible as well as the cameras

The meta quest forum and the reddit community offered the idea to factory reset and to update using the side load update through the official meta quest web and the original problem of the menú just appearing and the controllers bring useless i reset it and the result was that the proximity error disappeared but the black screen is still there

Soy dueño de un casco Meta Quest 3S y el problema que ha ocurrido es que la pantalla del casco se queda en negro pero aún emite sonido se puede escuchar el abrir y cerrar de menús y se puede ver qué la pantalla sigue funcional ya que se pueden ver la animación de inicio y el menú de booteo es funcional se ve y funciona pero los menús, opciones de apagado y avisos de apagado no son visibles al igual que las cámaras

La comunidad de meta Quest en reddit y el foro oficial me han dicho de formatear el casco y utilizar la opción de actualizar a través de side load desde la página oficial de meta Quest una vez actualizado el error original de la pantalla de buscando posición en sala no fue un problema pero la pantalla en negro sigue siendo un problema constante

⟐ Answered 三月 11, 2026 at 6:09 GMT-7

Meta Quest 3S: Headset's tracking completely stopped working

Wed, 11 Mar 2026 06:01:32 -0700

I was playing VRChat on this headset and the tracking on it completely stops working where the cameras are off and the microphone only works if I hold the power button (after 5 seconds of holding it would shut it down) as well as the controllers not responding to anything beside the quest menu button so I had to use the head direction movements and volume buttons to navigate around the menus. I went to the Headset Tracking option and the switch is stuck on as it won't let me toggle it at all.I'vr also used ADB to clear the data of all the oculus system apps and restart it to safe mode but it didn't fix the problem. Is there something wrong with the hardware or does it need to be factory reset?

⟐ Answered 三月 11, 2026 at 6:01 GMT-7

Meta Quest 3S: How can I replace or fix the headset battery be cause I over charged i

Tue, 10 Mar 2026 04:14:48 -0700

My little brother was charging his headset overnight and during school but when he got home the battery was charging later found out that he overcharged it how can we fix it?

Meta Quest 3: It will be Possible to do a USB-C Port Replacement?

Sun, 08 Mar 2026 21:55:03 -0700

My Quest 3 USB port is only allowing charging, plugging it on my pc it gets unrecognized but seen, for now im using adb, but i prefer when i can connect it to my pc.

⟐ Commented 三月 08, 2026 at 21:55 GMT-7

Meta Quest 3S: How do I fix my stick drift?

Sun, 08 Mar 2026 13:07:16 -0700

I’ve had my Meta Quest 3s since December 31st. Its August 21st as of this being posted, It’s been about a week and i’ve had really bad stick drift issues, especially on my right controller. i’ve tried to recalibrate and clean my controllers, like the official guide says, but i’m still met with issues. What can I do without completely replacing my controllers? help!

⟐ Commented 三月 08, 2026 at 13:07 GMT-7

Meta Quest 2: How do I fix stick drift?

Sat, 28 Feb 2026 09:20:04 -0700

I have hit both of my controllers and stick drift is a common problem, how do i fix it

Meta Quest 3S: Meta Quest 3S Won't Charge – Intermittent USB-C Connection Issues

Fri, 27 Feb 2026 21:07:20 -0700

I purchased a Meta Quest 3s 3 weeks ago. It was working fine until 2 days ago.

When I plug it into the provided USB-C charger, it connects and disconnects intermittently. Initially, it struggled to maintain a stable connection for about an hour before it finally began charging. After my next use, the battery drained completely, and now it won’t charge at all. Occasionally, it briefly makes contact, but it immediately disconnects again.

It's been 40 minutes and it isn't charging. I've tried multiple adapters, cables and outlets.

I'm in Argentina, and Meta Support say they can't send replacements.

Any idea how I could go about fixing it?

Thank you!

Here's an image of the USB-C port.

⟐ Answered 二月 27, 2026 at 21:07 GMT-7

Meta Quest 3S: How do I fix meta quest 3s controller button?

Thu, 26 Feb 2026 03:40:14 -0700

I got some wd40 to help with a stick drift issue, but some of the wd40 got onto one of the controller buttons, and now it's not responding to my input. I'm still able to press the button, but it doesn't make the same sound compared to the rest of the buttons on my controllers when i press them. It's been quiet after i heard a crunching sound when i pressed it after the wd40 i put on the joysticks was able to dry.

What do i do? Am i able to fix it, or do i need a new controller all together?

⟐ Commented 二月 26, 2026 at 3:40 GMT-7

Meta Quest 3: How do I fix my left meta quest 3 controllers tracking

Tue, 24 Feb 2026 22:00:36 -0700

My controller just like keeps flying all over the place not in real life in games

⟐ Answered 二月 24, 2026 at 22:00 GMT-7

Oculus Rift S: Why is my Oculus Rift blacking out and beeping?

Thu, 05 Feb 2026 09:55:04 -0700

My oculus Rift will work for a few minutes then it will black out and start beeping.

⟐ Answered 二月 05, 2026 at 9:55 GMT-7

Meta Quest 3S: How do I replace my ir tracking lights?

Sat, 03 Jan 2026 17:17:31 -0700

They were peeled off by my cousin.

Meta Quest 3S: How do I fix a black screen?

Sun, 21 Dec 2025 20:00:10 -0700

My screen is black when turning on but the volume thing I can see on the screen when I push the volume up or down button but nothing else I’ve tried rebooting it restarting it and factory reset it and still nothing

⟐ Commented 十二月 21, 2025 at 20:00 GMT-7

Meta Quest 2: Why is my oculus not charging?

Sun, 21 Dec 2025 07:39:03 -0700

I’ve tried different Chargers and it won’t charge. No light comes on either.

⟐ Answered 十二月 21, 2025 at 7:39 GMT-7