<![CDATA[iFixit - Answers With Device "Medical Device"]]> https://zh.ifixit.com/Answers/Device/Medical_Device/All?rss=yes en-US Thu, 03 Sep 2026 07:10:33 -0700 <![CDATA[Philips Allura: 中国联系窗口]]> 想请问一下在中国可以联系谁帮忙拆机，可以帮忙提供一个联系人和联系方式么，感谢!

⟐ Answered 五月 08, 2024 at 5:11 GMT-7

]]> https://zh.ifixit.com/Answers/View/559262/%E4%B8%AD%E5%9B%BD%E8%81%94%E7%B3%BB%E7%AA%97%E5%8F%A3 https://zh.ifixit.com/Answers/View/559262 Wed, 08 May 2024 05:11:21 -0700 <![CDATA[Medical Device: Poor oxygen in a generating device]]> I have a problem with the oxygen generator, the device is working but not as efficiently as it should be, knowing that all the filters are clean, what are the suggested solutions?

⟐ Commented 九月 03, 2026 at 6:15 GMT-7

]]> https://zh.ifixit.com/Answers/View/970876/Poor+oxygen+in+a+generating+device https://zh.ifixit.com/Answers/View/970876 Thu, 03 Sep 2026 06:15:27 -0700 <![CDATA[Miscellaneous Medical Therapy Equipment: M red light therapy pad]]> My red light therapy pad only works on the bottom third of the pad, sometimes if I bend it a certain way it comes on for a second or two, how can I fix it?

]]> https://zh.ifixit.com/Answers/View/970757/M+red+light+therapy+pad https://zh.ifixit.com/Answers/View/970757 Tue, 01 Sep 2026 13:44:21 -0700 <![CDATA[ResMed AirSense 10: Where can I get a fuse for my Resmed airsense 10?]]> where can I get a fuse for my Resmed airsense 10?

⟐ Answer edited 九月 01, 2026 at 8:51 GMT-7

]]> https://zh.ifixit.com/Answers/View/895709/Where+can+I+get+a+fuse+for+my+Resmed+airsense+10 https://zh.ifixit.com/Answers/View/895709 Tue, 01 Sep 2026 08:51:44 -0700 <![CDATA[Zoll Impact Uni-Vent 731: How to enter the service menu.]]> Does anyone knows how to enter the service menu?

⟐ Answered 八月 26, 2026 at 23:10 GMT-7

]]> https://zh.ifixit.com/Answers/View/731988/How+to+enter+the+service+menu. https://zh.ifixit.com/Answers/View/731988 Wed, 26 Aug 2026 23:10:09 -0700 <![CDATA[VersaMed iVent 201: VersaMed iVent 201 screen freeze and partially responsive control knob after power cycle]]> The VersaMed iVent 201 ventilator screen is frozen with ventilation active. The rotating control knob is only partially functional (only changes rate and accesses the menu option, but other parameters cannot be adjusted). Complete battery discharge and power cycling have been performed, but upon powering back on, the unit immediately resumes the previous ventilation mode with the same partial knob unresponsiveness. What could be causing this persistent interface lock, and how can it be resolved?

]]> https://zh.ifixit.com/Answers/View/968997/VersaMed+iVent+201+screen+freeze+and+partially+responsive+control+knob+after+power+cycle https://zh.ifixit.com/Answers/View/968997 Thu, 20 Aug 2026 13:26:14 -0700 <![CDATA[Fresenius Medical Care 2008T: Fail neg stabilize what could be the answer]]> Fail negative stabilize

⟐ Marked as duplicate 八月 19, 2026 at 0:49 GMT-7

]]> https://zh.ifixit.com/Answers/View/968756/Fail+neg+stabilize+what+could+be+the+answer https://zh.ifixit.com/Answers/View/968756 Wed, 19 Aug 2026 00:49:59 -0700 <![CDATA[Fresenius Medical Care 2008T: What could be the answer on this issue? Alarm test failed]]>

Alarm test failed

Fail * Air Detector

Fail * Blood Leak 1

Fail Art High Hard Fail Art Low Hard

Fail Art High Soft Fail Art Low Soft

Fail Ven High Hard Fail Ven Low Hard Fail Ven High Soft Fail Ven Low Soft Fail TMP High Hard Fail TMP Low Hard

⟐ Marked as duplicate 八月 19, 2026 at 0:49 GMT-7

]]> https://zh.ifixit.com/Answers/View/968753/What+could+be+the+answer+on+this+issue+Alarm+test+failed https://zh.ifixit.com/Answers/View/968753 Wed, 19 Aug 2026 00:49:59 -0700 <![CDATA[Pride Mobility Jazzy 600 Power Wheelchair: Torque specs on M10 bolts]]> I have a 2018 Jazzy 600 es wheelchair. It did not come with transit brackets so I bought them on eBay to save $150.00. I need to know what are the torque specs for the M10 bolts that attach the transit brackets to the frame?

]]> https://zh.ifixit.com/Answers/View/968363/Torque+specs+on+M10+bolts https://zh.ifixit.com/Answers/View/968363 Sun, 16 Aug 2026 07:59:23 -0700 <![CDATA[ResMed AirSense 10: Why Does my Machine no longer records my nightly usage, it shows 2.3h]]> Why does my CPAP M/C fail to record my actual usage after 8 hours it shows 2.38 hours of usage.

I am a long term user of CPAP and have never seen this is failure previously

⟐ Answer accepted 八月 11, 2026 at 0:22 GMT-7

]]> https://zh.ifixit.com/Answers/View/967563/Why+Does+my+Machine+no+longer+records+my+nightly+usage,+it+shows+2.3h https://zh.ifixit.com/Answers/View/967563 Tue, 11 Aug 2026 00:22:31 -0700 <![CDATA[ResMed AirSense 10: My unit is making a loud noise when I breathe in and out]]> How can I fix the loud noise when breathe in and out?

⟐ Answered 八月 09, 2026 at 3:28 GMT-7

]]> https://zh.ifixit.com/Answers/View/718634/My+unit+is+making+a+loud+noise+when+I+breathe+in+and+out https://zh.ifixit.com/Answers/View/718634 Sun, 09 Aug 2026 03:28:11 -0700 <![CDATA[Olympus ESG-400: E091 of Olympus ESG-400]]> I have an Olympus ESG - 400 machine. It has an E091 error. I have thoroughly checked and determined that this error is caused by RF board. If you have encountered this error and managed to fix it, please share the solution with me.

]]> https://zh.ifixit.com/Answers/View/967142/E091+of+Olympus+ESG-400 https://zh.ifixit.com/Answers/View/967142 Fri, 07 Aug 2026 01:56:47 -0700 <![CDATA[Samsung Ultrasound MySono U6: System doesn’t boot]]> The system turns on, but the screen has no image.

What can I do?

⟐ Commented 七月 31, 2026 at 16:08 GMT-7

]]> https://zh.ifixit.com/Answers/View/882302/System+doesn%E2%80%99t+boot https://zh.ifixit.com/Answers/View/882302 Fri, 31 Jul 2026 16:08:44 -0700 <![CDATA[Penlon AV-S: Why does my ventilator does not work according to my tidal volume?]]> Why does my ventilator don't work according to the tidal volume set

⟐ Commented 七月 23, 2026 at 9:41 GMT-7

]]> https://zh.ifixit.com/Answers/View/965065/Why+does+my+ventilator+does+not+work+according+to+my+tidal+volume https://zh.ifixit.com/Answers/View/965065 Thu, 23 Jul 2026 09:41:21 -0700 <![CDATA[ResMed AirSense 10: I need a firmware update]]> How do I update the firware in my Airsense? The internal modem is a 4G and I had to restore factory defaults and now it is back-leveled.

⟐ Answer edited 七月 21, 2026 at 10:34 GMT-7

]]> https://zh.ifixit.com/Answers/View/797368/I+need+a+firmware+update https://zh.ifixit.com/Answers/View/797368 Tue, 21 Jul 2026 10:34:18 -0700 <![CDATA[SOMNOcomfort and SOMNObalance Ventilator: Parts for the equipment]]> Where can I find a mask and pipe for this machine to purchase

⟐ Answered 七月 21, 2026 at 2:40 GMT-7

]]> https://zh.ifixit.com/Answers/View/964742/Parts+for+the+equipment https://zh.ifixit.com/Answers/View/964742 Tue, 21 Jul 2026 02:40:19 -0700 <![CDATA[Ohio Medical care-e-vac3: Bottom light is on]]> Why is the bottom light on

⟐ Answered 七月 13, 2026 at 1:20 GMT-7

]]> https://zh.ifixit.com/Answers/View/963631/Bottom+light+is+on https://zh.ifixit.com/Answers/View/963631 Mon, 13 Jul 2026 01:20:51 -0700 <![CDATA[Clinical Equipment: user manual for the MAC PC ECG machine 403506-001]]> does anyone have access to a MAC PC ECG machine 403506-001user manual?

⟐ Commented 七月 10, 2026 at 18:25 GMT-7

]]> https://zh.ifixit.com/Answers/View/963407/user+manual+for+the+MAC+PC+ECG+machine+403506-001 https://zh.ifixit.com/Answers/View/963407 Fri, 10 Jul 2026 18:25:46 -0700 <![CDATA[Respironics Remstar Choice: Do you sell working units?]]> Greetings,

Do you sell these models?
I have one now and want to get a spare and a second unit.
If so, what do you charge ?

⟐ Answered 七月 02, 2026 at 9:23 GMT-7

]]> https://zh.ifixit.com/Answers/View/962228/Do+you+sell+working+units https://zh.ifixit.com/Answers/View/962228 Thu, 02 Jul 2026 09:23:35 -0700 <![CDATA[A-dec 300 Chair: The hand piece is leaking water]]> My dental slow speed is leaking water even with it in the hanger?

⟐ Commented 六月 30, 2026 at 10:02 GMT-7

]]> https://zh.ifixit.com/Answers/View/934607/The+hand+piece+is+leaking+water https://zh.ifixit.com/Answers/View/934607 Tue, 30 Jun 2026 10:02:01 -0700