Can SSD be replaced?

My SSD storage is a bit small, I would like to change a little bigger drive, can be replaced?

⟐ Answer deleted 六月 05, 2020 at 3:41 GMT-7

⟐ Commented 九月 24, 2025 at 1:15 GMT-7

⟐ Answered 三月 19, 2025 at 0:15 GMT-7

按下开机键后，屏幕没有反应，黑屏。键盘灯不亮，背面的苹果LOGO灯不亮。

只有风扇声。

⟐ Answered 十二月 03, 2024 at 1:40 GMT-7

去授权店进行检修说是屏幕出问题了，后面又去直营店天才吧进行检修，说是可能和系统有关。但是我已经进行过抹盘重装，系统无论是升级到10.4还是10.15都会出现这个问题。

另外我装了双系统，在windows下面没有出现过此种情况。

黑屏状态如图（背光正常）

一、ssd是否可以拆换

二、是否可以使用不是苹果定制版的ssd

三、例三星的ssd接口是否需要转换器

⟐ Answered 十月 29, 2025 at 1:11 GMT-7

My iPhone has connected perfectly until today, when it started doing the same thing as the iPad. All other USB devices work fine, and my iPad and iPhone both connect with the windows computers at work just fine. I've tested with both USB ports on my MacBook, and with several known working cords, both Apple branded and not.

I've done a lot of searching, and haven't found any definitive answers or solutions, but today I thought I would try something.

I use Windows 10 in VMWare on my laptop for work (and yes I made sure it wasn't running before trying to sync to make sure that wasn't causing the connectivity issues). But today I opened Windows on my MacBook, and when I plugged in my iPad I told it to open in Windows, and voila it connected to iTunes in windows fine and stayed connected.

This leads me to believe it is some sort of software issue on the MacBook side of things. I even tried closing itunes and just plugging my phone in to charge, and it again acted as though I was continuously plugging it in and unplugging it, but stayed connected in Windows.

Is there something I can do to correct this? I thought it might be an iTunes issue, but since it wouldn't even keep my phone connected enough to charge without iTunes open, I'm assuming it's an OSX issue.

Any suggestions would be greatly appreciated!!

⟐ Commented 十月 14, 2025 at 22:45 GMT-7

Other symptoms includes No audio devices found(cant play sound)

Is there any possible reasons for this? I highly doubt is a software problem.

hey guys an update on my issue, i never went for a fix, the problem went away after i left it to rest for a few days, i believe its an overheat issue. my screen has been working fine for the past few months since reporting this. Not sure it will come back, but this is definitely a faulty hardware, and Apple is not admitting it!

Affected model: 2016 Macbook Pro touch bar

I never went for a fix till now and using the same mac, the problem still comes and go, usually happen when overheating/heavy usage. I brought my macbook for de-dusting the fans and apply new heat paste for my processor in hope that it can reduce overheating issues, replacing the whole display costs too much.

Apple did an update for this issue for the FlexGate issue: 13-inch MacBook Pro Display Backlight Service Program. Sadly it doesn’t cover the T-CON issues.

⟐ Commented 七月 01, 2025 at 7:48 GMT-7

⟐ Answered 七月 09, 2025 at 5:09 GMT-7

After some brief surfing around this morning, I went to work with my MacBook running fine as usual. After coming home, my keyboard and trackpad are both unresponsive. What's a bit more unsettling is that, in the System Preferences, it's not even recognizing a trackpad as being connected.

After doing some searching around, I've found that some people ran into this issue with MacBook Pros, and it was because of a ribbon that had become loose underneath the battery. I'm wondering if it's possibly the same problem for me with my MacBook Air. I hadn't read about anyone with an Air experiencing the same problem.

Any help would be appreciated.I would love to get my Air working so I don't have to constantly use my external keyboard/mouse.

Thanks!

Edit: The only key that works on the keyboard is the power button.

⟐ Answered 七月 07, 2025 at 6:09 GMT-7

⟐ Commented 十二月 28, 2021 at 8:19 GMT-7

⟐ Answered 二月 03, 2026 at 10:27 GMT-7

Here's what's going on:

I have an A1226 15" MacBook Pro (mid 2007) with serial number: W872218YX92. I can't get it to turn on; whether it's plugged into the AC adapter or on a battery, I get no visible or audible response from the machine when I push the power button--none of the lights turn on, none of the fans spin, etc.

I've read about the nVIDIA 8600GT issue, but I don't get any response from the machine at all, so I'm not sure if that's what the problem is. The other thing I've read could be at fault is the 'Left I/O' board', but this thing won't turn on when using AC or a battery. One thing I haven't tried yet is to open it up and check the top cover power switch; is the power switch something that frequently breaks?

Lastly, when the MagSafe adapter is plugged into the machine, the LED on it always glows green--whether or not the battery is plugged in. When the battery is plugged in, the 'charging' LEDs on it do not light up or blink and thus the battery does not charge.

⟐ Answered 七月 10, 2025 at 23:42 GMT-7

⟐ Commented 六月 30, 2025 at 13:09 GMT-7